Removing The Valve Cooktop - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly

3-4 Removing the Valve Cooktop

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Switch
Ignition
Fitting
(Gas line)
Valve
Cooktop
SWITCH IGNITION
FITTING (GAS LINE)
ASSY VALVE-MANIFOLD COATING
15
1. Turn off the electrical supply going to
the range.
2. Shut off the gas shut-off valve in the
gas supply line to the range.
3. Remove the ASSY FRAME
COOKTOP, knob and the chassis
manifold panel.
4. Place
switch ignition and pull it straight out
to release it from the control shaft.
Repeat for each switch.
5. Using a tubing wrench and a channel-
lock wrench, disconnect the gas lines
from the valve cooktop. Do not bend or
crimp gas lines during removal.
6. Remove 2 screws from ASSY VALVE-
MANIFOLD COATING
Note : When assembling and
disassembling the valve, the torque
should be 1.5N.m.
7. Remove the valve cooktop.