Removing The Valve Cooktop - Samsung NX58R4311SS Service Manual

3. Disassembly and Reassembly

3-5 Removing the Valve Cooktop

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range. Replace all panels before operating range. Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Switch
Ignition
Fitting (Gas
line)
Valve
Cooktop
This document can not be used without Samsung's authorization.
Explanation Photo
SWITCH IGNITION
FITTING (GAS LINE)
ASSY VALVE-MANIFOLD
COATING
16
Explanation
1. Turn off the electrical supply going
to the range.
2. Shut off the gas shut-off valve in
the gas supply line to the range.
3. Remove the ASSY FRAME
COOKTOP, knob and the chassis
manifold panel.
4. Place a finger behind each side
of the switch ignition and pull it
straight out to release it from the
control shaft. Repeat for each
switch.
5. Using a tubing wrench and a
channel-lock wrench, disconnect
the gas lines from the valve
cooktop. Do not bend or crimp gas
lines during removal.
6. Remove 2 screws from ASSY
VALVE-MANIFOLD COATING
Note : When assembling and
disassembling the valve, the
torque should be 1.5N.m.
7. Remove the valve cooktop.