Memory Management - sauter TO-EE Instruction Manual

5.10 Memory management

5.10.1 Save record
By pressing the key
measured thickness value is stored in the currently selected data group. It is added to
the group as the last data set.
5.10.2 Display stored data records
This function allows the user to display records of a desired data group that was
previously stored in memory. The procedure is as follows:
Activate the "Memory Manager" function (right figure).
Press or to
dialog box (see the following figure).
Press or to move the cursor to the desired record.
Press F3 to delete the selected record.
Press F2 to delete all records in this group.
To exit, press / F1.
TO-BA-e-2020
, as soon as a new measured value display appears, the
move the cursor; press or F3 to display the View Record Data
21