Table of Contents
Advertisement
For printing and cutting, enter the same values as used for the duplicate data created on the
material.
6.
Select an option for [Device], [Mode], and [Output Profile] from their pull-down lists and click [Out-
put].
Setting item
[Device]
Select the machine model.
[Mode]
[Cut with AAS]/[Cut]/
[FlexCut]
[Output Profile]
[Foil]
*1
The first time you perform this action, select the [Foil] saved as default, and after saving some settings as pre-
sets, select the profile to use as reference for the material to be cut.
Setting details
*1
Cutting Multiple Sets of the Same Cutting Data
Notes
[Cut with AAS]: For printing and cutting
[Cut]: For cutting only
[FlexCut]: For perforated cutting
Click the parameter values to edit cutting conditions.
93
Other Cutting
Advertisement
Table of Contents
