Table of Contents
Advertisement
Loading the Material
MEMO
Sprocket-fed perforated material has perforations along each edge. If the pinch rollers are positioned over
the perforations, the material cannot be fed correctly. When using this material with the machine, place the
pinch rollers to avoid the perforations.
4.
When loading material that lifts up easily, place the pinch rollers on the middle of the material.
Individually raise pinch rollers that are not in use.
5.
Lower the lever.
The material is secured in place.
MEMO
When you turn on the power, the screen for measuring the material size appears.
Roll
Key
6.
When loading material longer than 1.6 m (63.00 in.), set the material feeding so the material length
required for the cutting data is fed before cutting starts.
P. 130 "Preventing Positioning Errors by Setting Material Feeding"
RELATED LINKS
・ P. 10 "Conditions for Usable Materials"
・ P. 11 "Cutting area"
・ P. 22 "Precautions for Loading Materials"
・ P. 21 "Important Notes on Using Pinch Rollers"
・ P. 31 "Measuring the Material Size"
30
Basic Settings and Operations
Edge
Single
Key
Key
Advertisement
Table of Contents
