Table of Contents
Advertisement
Performing Cutting
If you have saved presets, you can load a preset and apply cutting conditions.
8.
Switch to the [Paper] tab and enter the size of the loaded material (X: length/Y: width) under [Paper
Size].
9.
Click [OK] to close the [Printing Preferences] window.
10.
In the [Print] window, click [Print].
11.
In the [Print] window, click [Done].
12.
Click [File]>[Print] to open the [Print] window again.
Using the preview, check that the cutting data is displayed at the bottom left.
13.
Click [Print].
The cutting job is sent to the machine.
RELATED LINKS
・ P. 32 "Remove the Material"
・ P. 83 "Setting Up Section Cutting"
・ P. 84 "Setting Up Perforated Cutting Using the Printer Driver"
・ P. 109 "Setting Overlap Cutting Using the Printer Driver"
・ P. 122 "Loading and Applying a Preset"
76
Basic Printing and Cutting
Advertisement
Table of Contents
