Dealing with Material Thickness/Hardness (Softness)
Setting Up Overlap Cutting with GreatCut-R
You can set up to five overlap cutting processes in which cutting is repeated in the same position.
Procedure
1.
Start GreatCut-R.
2.
Display cutting data, which includes the cutting lines, on the GreatCut-R work screen.
• GreatCut-R format file:
Select the cutting data from [File]>[Open], and then click [Open].
• Other files:
Select the cutting data from [File]>[Import], and then click [Open].
MEMO
CorelDRAW format files cannot be imported into GreatCut-R. Open the target cutting data in CorelDRAW and
click
on the menu bar.
3.
Click [File]>[Cut].
The [Output to device] window appears.
4.
Click the [Step count] value under [Parameter] and select the number of times to cut.
110
Optimizing the Output Quality