Operation; Parts Identification - Power Fist 8383853 User Manual

8383853
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high
grade lubricant for the life of the unit under normal conditions. Therefore, no
further lubrication is required.
UNPACKING
1. Carefully remove the parts and accessories from the box.
2. Make sure that all items listed in the parts lists are included.
3. Inspect the parts carefully to make sure the tool was not damaged
while shipping.
4. Do not discard the packaging material until you have carefully inspected
and satisfactorily operated the tool.
WARNING! If any part is missing, do not operate the tool until the missing
parts are replaced. Failure to do so could result in serious personal injury.

OPERATION

PARTS IDENTIFICATION

Accessory holder
For technical questions call: 1-800-665-8685
Multi-Purpose Oscillating Tool
ON/OFF switch
Air vents
V 2.0
Hex key holder
9