Specific Safety Precautions; Operation - Power Fist 8980765 User Manual

8980765

SPECIFIC SAFETY PRECAUTIONS

WARNING! DO NOT let comfort or familiarity with product (gained from repeated
use) replace strict adherence to the tool safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific function. Do
not modify or alter this tool and do not use it for an unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing part
before operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the parts list are included.

OPERATION

1. Remove the barrel (#12) from the unit and then remove the knurled nuts (#7)
along with the washers (#8).
2. Remove the barrel lid (#9).
3. Load the barrel (#12) to 1/2 capacity for polishing and to 3/4 for more pointed,
abrasive rocks.
4. Ensure all materials are similar in nature.
5. Add enough water to reach the bottom of the top layer of rocks. Plastic pellets
(not included) can also be used.
NOTICE! It is imperative to always load the barrel with the proper amounts of
materials. Failure to do so may result in unsuccessful performance or motor
damage.
6. Seal the rubber barrel (#12) and replace the barrel lid (#9) along with knurled nuts
(#7) and washers (#8).
NOTICE! Make sure to check the lid seal during the first ten minutes to ensure that
it is not leaking.
7. Set the rubber barrel (#12) on the roller shafts (#4, 42).
8. Make sure the stops (#6) are lightly touching the barrel lid (#9). This will prevent
them from rubbing and will reduce friction.
4
3 lb Rotary Rock Tumbler
For technical questions call 1-800-665-8685
V4.0