During Installation; During Use; Service And Maintenance; Dismantling And Scrapping - Mitsubishi Electric E1000 Series Service And Maintenance Manual

Safety Precautions
– The LCD display liquid contains a powerful irritant. In case of skin contact, wash
immediately with plenty of water. In case of eye contact, hold the eye open, flush
with plenty of water and get medical attention.
– The figures in this manual serves an illustrative purpose. Because of the many
variables associated with any particular installation, the supplier cannot assume
responsibility for actual use based on the figures.
– The supplier neither guarantees that the operator panel is suitable for your partic-
ular application, nor assumes responsibility for your product design, installation
or operation.
1.3

During Installation

– The operator panel is designed for stationary installation on a plane surface, where
the following conditions are fulfilled:
– no high explosive risks
– no strong magnetic fields
– no direct sunlight
– no large, sudden temperature changes
– Install the product according to the accompanying installation instructions.
– Ground the product according to the accompanying installation instructions.
– Only qualified personnel may install the operator panel.
– Separate the high voltage, signal and supply cables.
– Make sure that the voltage and polarity of the power source is correct before con-
necting the product to the power outlet.
– Peripheral equipment must be appropriate for the application and location.
1.4

During Use

– Keep the operator panel clean.
– Emergency stop and other safety functions may not be controlled from the oper-
ator panel.
– Do not use too much force or sharp objects when touching the keys, touch screen
etc.
1.5

Service and Maintenance

– Only qualified personnel should carry out repairs.
– The agreed warranty applies.
– Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
– Clean the display and surrounding front cover with a soft cloth and mild deter-
gent.
– Replacing the battery incorrectly may result in explosion. Only use batteries rec-
ommended by the supplier.
1.6

Dismantling and Scrapping

– The operator panel or parts thereof shall be recycled according to local regulations.
– The following components contain substances that might be hazardous to health
and the environment: lithium battery, electrolytic capacitor and display.
6 Mitsubishi Electric, MA00758A