Update Software; E-Designer 7; Remote Access Viewer; Image Loader - Mitsubishi Electric E1000 Series Service And Maintenance Manual

Software
4.2

Update Software

When an update is available, an e-mail is sent to the distributors. The software is also
available on the manufacturer's web site.
The update should be installed by qualified personnel. When updating an operator
panel it is important to ensure that the power is not interrupted during the transfer.
4.2.1

E-Designer 7

E-Designer 7 is not a freeware product. To update this software, an accredited E1000
operator panel dealer must be contacted.
4.2.2

Remote Access Viewer

This software is included on the E-Designer 7 software CD.
4.2.3

Image Loader

An upgrade of the complete software package is sometimes needed to take advantage
of new functionality. The complete software package consists of the EBOOT, the
Windows CE operating system and the system program. The upgrade is done by run-
ning the Image Loader executable file, Bxxx_iml.exe. The Image Loader application
will help and guide you through the upgrade.
When the upgrade is finished, the operator panel will receive the default IP address
192.168.1.1. Follow the instructions on the screen after startup to change the IP ad-
dress.
The "Update Operator Terminal System Program" function in E-Designer 7 shall
not be used when the Image Loader application is used to upgrade the operator panel.
Note:
ALL existing data, including the file system and the project application files, in the op-
erator panel will be deleted (overwritten) by the Image Loader application
Note:
The Image Loader software is only intended for customers and partners that have an
operator panel. No other distribution is allowed.
For E1012 and E1022, see section
E1022.
60
Downloading the System Program in E1012 and
Mitsubishi Electric, MA00758A