Chapter 4 The Way Of Operating; The Communication Setting - Omron OMNUC W Series User Manual

Chapter 4 The way of operating
4-1

The communication setting

■ ■ ■ ■ The communication setting
It sets in the communication by the following procedure.
Clicks 【 the communication setting 】 from 【 Display 】 menu.
1.
The following screen is displayed.
It chooses the communication port which communicates with the servo driver by
2.
thecommunication port column.
It chooses the communication method to use from the communication method
column.
It sets the number machine setting which is set to the connecting servo driver to the
communication method column.
4-1