Omron OMNUC W Series User Manual page 25

Chapter 3 The basic operation
■ ■ ■ ■ The explanation of each screen
Screen name
Monitor panel window
Servo data window
Data trace window
Status bar
Sub screen The contents
It displays the operation condition,
－
the input/output condition of the
servo driver.
Parameter It does the editing of a parameter, a
transfer, save.
Encoder It displays an input condition from
the encoder.
I/O It displays the input/output condition
of the servo driver.
Servo status It displays the operation condition of
the servo driver.
It displays the operation condition,
－
the input/output condition of the
servo driver in the corrugation.
It displays a connection model, soft
－
Ver., the number machine No. of the
connection model, a communication
method and a connection condition,
an operation condition, an operation
level.
3-3