Omron OMNUC W Series User Manual page 26

Chapter 3 The basic operation
■ ■ ■ ■ The menu / the Short-cut Key
Main menu Sub menu
File New Parameter File
Import Parameter File
Save
Save As
Close Servo Driver
Open Trace File
Print
Print Setup
1,2,3,4,5,6
Recent Files
View Monitor/
Parameter Section
Tuning Section
Main Toolbar
Monitor Panel
Status Bar
Options
Communication Settings
Operations Scan Servo Driver
Select Servo Driver
Go Offline
Jog
Parameters Send All
Send
Read All
Read
Reset All to Defaults
Help About Wmon Win
The contents
It creates a parameter file newly.
It opens existing parameter file.
It saves a working parameter file by
same name.
It puts an another name to the working
parameter file and it saves it.
It closes a working parameter file.
It interrupts communication with the
servo driver.
It opens a corrugated trace file.
It prints the contents of the parameter
file.
It changes the setting of a printer.
It displays the parameter file, which was
used recently in six.
It displays a monitor panel window, a
servo data window.
It displays a data trace window.
It changes the display / the non- display
of the tool bar.
It changes the display / the non- display
of the monitor panel window.
It changes the display / the non- display
of the status bar.
It sets the editorial level of the automatic
servo driver connection, the display
screen, and the parameter file in case of
start-up.
It does a communication port,
communication method,
machine No.setting.
It detects a connecting servo driver.
It chooses the
communicates with the
servo driver, and
communication.
It ends communication with the servo
driver.
It turns a servomotor at the JOG speed.
It transmits all the parameters of the
parameter file to be editing to the servo
driver.
It transmits one parameter to be
choosing by the cursor out of the
parameter file to be editing to the servo
driver.
It receives all the parameters of the
servo driver.
It receives one parameter, which is
choosing the inside of the parameter of
the servo driver by the cursor.
It makes the parameter of the parameter
file to be editing a factory shipment
value.
It displays the version information of
Wmon win.
3-4
Short-
cut key
Ctrl+N
Ctrl+Ｏ
Ctrl+Ｓ
－
－
－
Ctrl+Ｐ
－
－
－
a
number
－
－
unit, which
connecting
it begins
－
－
－
－
－
－
－
－
Icon
－
－
－
－
－
－
－
－
－