Chapter 4
The way of operating
4-7
The corrugated data trace
In the data trace window, the operation condition of the servo driver, the servo motor
can be monitored in the corrugation.
To monitor, it operates by the following procedure.
1. It connects with the servo driver by the procedure of " 4-2 Servo driver connection
and the connection blocking-off ".
2. Clicks 【 the tuning section 】 from the 【View】menu.
The following screen is displayed.
3.It clicks 【 setting 】 and it sets a measurement condition. It clicks 【OK】 if the
setting completes.
It sets a trace data.
・The analog data Two data
・The I/O data
It sets a sampling condition.
・The setting of sampling time
・The setting of pre trigger time
It sets a trigger condition.
・The setting of a trigger
source
・The setting of a trigger edge
・The setting of a trigger level
Two data
4-12