Table of Contents
Advertisement
1. Before installation, ensure you have not connected the appliance to the
mains supply.
2. The cooker hood should be placed at a
distance of 65~75cm above the cooking plane
for best effect.
4. The 2 air flaps should now be installed on the top of the unit, as access
is easier before the unit is wall mounted. The flaps should be carefully
installed, bending them slightly so the lugs at each end locate into the
holes in the outlet vent. When the unit is in operation the flaps pivot
upwards to allow airflow.
Please note: Ensure the small lugs at each end of each flap locate into
the holes on the housing and not the grooves above them.
3.
Drill all 7 holes for the hood using the
installation diagram as a guide. Use
the supplied screws (ST5 x 50mm) to
attach the hood installation plate, and
the Upper chimney bracket to the wall
in the correct position, ensuring the
plates are level.
9
Hide quick links:
Advertisement
Table of Contents
