Removal And Refitting Of The Glass Canopy - ElectrIQ eiQCURV60SC Installation And User Manual

REMOVAL AND REFITTING OF THE GLASS
CANOPY
WARNING: Components within the appliance may have
sharp edges. When attempting to remove or refit the
glass, gloves should be worn to avoid scratches and
cuts.
The glass canopy is held into position using four screws, spacers and decorative
washers. Remove the four screws, spacers and decorative washers from the
glass canopy, ensuring the canopy is suitably supported. Two people should
then lift the canopy off the hood, retaining the fittings removed for re fitting.
Refitting is the reverse of removal. Before refitting the hood, please ensure the
decorative trim is correctly located, and has not become detached or displaced
during disassembly.
14