SpectraLink IP-DECT 200 Configuration Manual page 28

Tag Name
%IP-DECT-
PROVISIONING-
FIRMWARE-
PP14225100%
%IP-DECT-
PROVISIONING-
FIRMWARE-pp14225110%
%IP-DECT-
PROVISIONING-SERVER-
PROTOCOL%
%IP-DECT-
PROVISIONING-SERVER-
USER%
%IP-DECT-
PROVISIONING-SERVER-
PASSWORD%
%IP-DECT-FWVERSION%
%IP-DECT-RFP-
DEFAULT-SYNC-TYPE%
%IP-DECT-RFP-AUTO-
ENABLE%
%IP-DECT-RFP-AUTO-
FORCE%
%IP-DECT-RFP-AUTO-
START-TIME%
%IP-DECT-SECURITY-
ALLOW-HTTP%
%IP-DECT-SECURITY-
ALLOW-NEW-MR%
%IP-DECT-SECURITY-
ALLOW-NEW-MEDIA-
RESOURCE-AS-ACTIVE%
%IP-DECT-SECURITY-
ALLOW-NEW-RFP%
BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES
© 2019 BROADSOFT INC.
Valid Settings
File name
File name
http/https
Device Access User Name
Device Access Password
A valid IP DECT Server
firmware version string. For
example pcs18Ba.
Free running, radio, LAN
true/false
true/false
immediately, hh:mm
true/false
true/false
true/false
true/false
Description
Specifies the name of the
firmware image to use for
Spectralink 75x2, 76x2 and 77x2
series handsets. The Spectralink
IP-DECT Server or DECT Server
checks for a version file and a
binary file. They must be located
as /.bin.ver and /.bin
Specifies the name of the
firmware image to use for
Spectralink 72x2 series handsets.
The Spectralink IP-DECT Server
or DECT Server checks for a
version file and a binary file. They
must be located as /.bin.ver and
/.bin.
Provisioning server protocol.
(Required)
Provisioning authentication
username.
(Required)
Provisioning authentication
password.
(Required)
The version of the IP-DECT
Server firmware that will be
provisioned.
(Required)
Specifies the synchronization
type used for the DECT radio.
Specifies if automatic update is
enabled or disabled. Only applies
to IP base stations.
Specifies if an automatic update
should be executed immediately
or wait until devices are idle. Only
applies to RFP6 base stations.
Specifies when to perform the
update, immediately or at a
specific time within 24h. Only
applies to IP base stations.
Specifies if unencrypted HTTP
request to the web GUI are
allowed.
If enabled new media resources
will be allowed to connect to the
server.
New media resources will
become active when added.
Otherwise they will have to be
manually activated
If enabled new base stations will
be allowed to connect to the
20-BD5445-00
PAGE 28 OF 49