Known Issues - SpectraLink IP-DECT 200 Configuration Manual

BroadWorks Xtended Services Interface (Xsi) and BroadCloud IM&P Support Table
Interface Feature
after Placing Call on Hold
Perform Mid-Call Change to Call
Recording Mode
Record Local Three-Way Call
Record Network Three-Way Call
XMPP Features – Contacts
Contact/Buddy List
Favorites
Groups
Non-XMPP Contacts
Conferences
XMPP Features – Login Invisible
Presence
Presence State
Presence Status
Contact's Presence State
2.3

Known Issues

This section lists the known interoperability issues between BroadWorks and specific
partner release(s). Issues identified during interoperability testing and known issues
identified in the field are listed.
The following table provides a description of each issue and, where possible, identifies a
workaround. The verified partner device versions are listed with an "X" indicating that the
issue occurs in the specific release. The issues identified are device deficiencies or bugs,
and are typically not BroadWorks release dependent.
The Issue Number is a tracking number for the issue. If it is a Spectralink issue, the issue
number is from Spectralink's tracking system. If it is a BroadWorks issue, the issue
number is from BroadSoft's tracking system.
For more information on any issues related to the particular partner device release, see
the partner release notes.
Issue Number Issue Description
INVITE failover time exceeded BroadWorks recommended
TBD
value.
DECT servers make 6 SIP request attempts prior to failover. The
total duration for the 6 SIP attempts and timeout typically lasts 10
to 20 seconds which exceeds the 6 seconds recommendation.
Workaround: None.
BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES
© 2019 BROADSOFT INC.
Supported Comments
No
No
No
No
No
No
No
No
No
No
No
No
Partner Version
X X
20-BD5445-00
PAGE 16 OF 49