Technical Data - oventrop mote 200 Operating Instructions Manual

Accessories
3.3

Technical data

Transmitting
+0 dBm at 3.0 V
power
Frequency
2.4 GHz
Battery
2× 1.5 V LR6/Mignon/AA
Connection M30 x 1.5 mm
thread
Operation Type 1
mode
Size (W x H x D) 56 x 68 x 89 mm
Weight
150 g (incl. batteries)
Protection
IP20
Degree of con- 2
tamination
4. Accessories
1 2
Illust. 2: Adapter
(1)
RAV pin for extending the valve stem when
using the RAV adapter.
(2) RAVL
(3) RAV
(4)
RA
5. Transport and storage
Remove the batteries if you are not going to use the
appliance for an extended period. Store the appli-
ance in a dry, dust-free place.
8
3 4
6. Installation
6.1 Inserting the batteries
The configuration is maintained when replacing
the batteries.
Illust. 3: Removing the battery case cover
(1)
LED display
(2) Battery case
(3) Battery case cover
(4)
Notch
1. Remove the battery case cover by pulling it off at
the notch.
2. Now insert the batteries. Observe the correct polari-
ty! Do not use rechargeable batteries!
- The "mote 200" only opens in menu mode
once you have inserted the batteries during
initial commissioning and after having been
restored to the factory settings (see 8.5 on
page 13). The "Installation/Removal"
menu option flashes.
- When replacing the batteries, this step is
skipped and the adaptation run is carried out
automatically.
3. Refit the battery case cover by pushing it down until
it engages with an audible click.
„mote 200"
1
2
3
4
115096180#EN-V04.01.2020