oventrop i-Tronic TFC Installation And Operating Instructions Manual page 22

Installation and initial operation
The rechargeable batteries
have to be charged
completely before putting the
Climate meter into operation
for the fi rst time.
1. Slip the Climate meter onto the table
stand from the top (illustr. 1)
X The following current values will be
displayed after some seconds:
Temperature, relative air humidity,
CO value
2
LED display battery charging state :
If the LED fl ashes red, the
rechargeable batteries of the table
stand need to be charged.
2. Insert the micro USB plug into the
socket on the back of the table
stand (illustr. 2).
3. Insert the mains adaptor into an
earthed socket.
X The charging operation starts. The
LED fl ashes green. Once charging
is complete, the LED will glow
green continuously.
4. Remove the charging cable.
- Charging operation running:
LED fl ashes green
- Mains operation (battery fully
charged): LED glows green
- Charging state critical:
LED fl ashes green
22
„i-Tronic TFC"
1
2