Tandem T:Slim X2 User Manual page 210

Chapter 21 – Inserting the Sensor and Placing the Transmitter
» Make sure the transmitter is
secure by sliding your fingers
under each long side of the
sensor pod and pressing down
on the transmitter with your
thumb of the same hand, like you
are pinching it.
4. Remove the transmitter latch by
holding the sides of your sensor
pod with one hand and quickly
twisting off the latch away from
your body with your other hand.
5. Do not remove the transmitter
from the sensor pod while the
pod is attached to your skin
The sensor pod should stay on your
skin using its own adhesive. But, if the
patch is peeling up, you can use med-
ical tape for extra support. If you use
tape, only tape over the white adhesive
patch on all sides for even support. Do
not tape over the transmitter or any of
the plastic parts of the sensor pod. Do
not tape under the sensor pod or leave
any substance on the skin where you
insert the sensor.
210 Customer Technical Support: (877) 801-6901