To Edit Sequence Settings - 1010music BLACKBOX 1.5 User Manual

Action
Turn the bottom right control knob
Two finger pinch or stretch
Single finger drag or swipe
Note:
•
When the Sequencer Screen reloads, it zooms horizontally to display the number of steps that have
been selected in Step Count, and scrolls vertically to display the entered notes.
•
The note position is restricted to the Step Count configured for this Note Sequencer.
• When recording, the sequencer will add the incoming notes to the sequence. It will not remove
previously existing notes. Touch Clear before touching REC if you want to start with a clean piano roll.
• The C notes on the piano roll are numbered to indicate which octave is currently displayed. If you
zoom out too far the numbers will not be displayed.
•
The numbers across the top of the piano roll indicate the step numbers. If you zoom out too far the
numbers will not be displayed.
•
To quickly switch which sequence you are editing, touch the grid icon in the top left corner of the
screen and then touch the square in the selection grid that corresponds to the sequence you want to
edit.
5. Push EDIT from the Piano Roll screen to access some basic editing features.
Edit Menu
Option
Cut
Copy
Paste
Clear

To Edit Sequence Settings:

Each sequence cell has sequence parameters to control the length of the steps, the length of the sequence,
quantization, duty cycle and MIDI Output channel.
1. Push SEQ and touch the sequence cell you want to edit.
2. Push INFO twice to display the sequence parameters page. Push INFO again to cycle through additional
parameter pages and the piano roll view.
3. Use the control knobs to adjust the values of the sequence parameters:
5/6/2020 8:54:00 PM
Page 41 of 70
Action
Copy all of the notes and pad triggers and parameter
settings in this sequence and clear the piano roll of this
sequence. The cut information is now in the clipboard for
pasting into a sequence.
Copy all of the notes and pad triggers and parameter
settings in this sequence. The copied information is now in
the clipboard for pasting into a sequence.
Paste the sequence information from the clipboard into
the current sequence. Pasting is an additive action. This
means that it only adds notes and pad triggers to the
piano roll. It doesn't remove them. This can be useful to
merge two sequences together. Keep in mind that the
sequence parameters are also copied along with the
note and pad events.
Clear all note and pad trigger information from this
sequence. All parameter settings remain untouched.
BLACKBOX USER MANUAL v 1.5
Result
Moves the currently selected note up or down
through the piano scale. (Only works in KEYS view)
Zooms the piano roll in or out
Scrolls the piano roll
Piano Roll Edit Menu
Copyright 1010music LLC 2020