Emerson AMS User Manual page 16

Configuration
July 2020
5. Specify which measurements (velocity, temperature, etc.) correspond to the
6. Specify alert levels.
7. Specify the update rate.
8. Configure trending of parameters.
16
process variables PV, SV, TV, and QV. Specify the units (English, metric, or SI)
for each parameter.
By default, PV corresponds to Z-axis overall, SV is X-axis overall, TV is Y-axis overall,
and QV is Z-axis PeakVue.
Determine the thresholds at which measurement alerts will display and determine
the behavior of device alerts. See the alert limits in
The default update rate is once every 60 minutes. A faster update rate is not
recommended as it significantly reduces battery life.
You can trend parameters in multiple locations such as in a plant historian, in AMS
Machine Works, and in a DCS control system.
User Guide
MHM-97927-PBF
Device variable alert limits
MHM-97927-PBF, DRAFT