Emerson AMS User Manual page 69

User Guide
MHM-97927-PBF
B.3 Ordinary location certification (CSA)
As standard, the transmitter has been examined and tested to determine that the design
meets basic electrical, mechanical, and fire protection requirements by CSA, a nationally
recognized testing laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
Electromagnetic Compatibility (EMC) (2014/30/EU)
All Models: EN 61326-1
Canadian Standards Association (CSA)
CAN/CSA-C22.2 No. 61010-1-04 - Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use, Part 1: General Requirements
ISA S82.02.01 2nd (IEC 61010-1 Mod) - Safety Standards for Electrical and Electronic Test,
Measuring, Controlling and Related Equipment - General Requirements
UL 61010-1 2nd - Safety Requirements for Electrical Equipment for Measurements,
Control, and Laboratory Use, Part 1: General Requirements
B.4 CE mark
The device has been tested and complies with all relevant directives required for CE
marking.
MHM-97927-PBF, DRAFT
Table B-1: Radio Approvals
Serbia
Singapore
South Africa
UAE
US
Product certifications
(continued)
Complies with IDA Standards DA 100927
NL5-A9530M1
Model: A9530V1, A9530V3
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
July 2020
69