Emerson AMS User Manual page 24

Configuration
July 2020
2.3 Configuration with AMS Device Manager
2.3.1 Configure wireless network credentials in AMS Device
Manager
Prerequisites
Before performing operations in AMS Device Manager, first scan the AMS Wireless
Vibration Monitor with a wired HART modem. Right-click the HART Modem icon
Device Explorer and select Scan All Devices.
Note
Configuring the wireless network is only applicable using a wired HART modem and
cannot be done using WirelessHART devices.
Procedure
1. In AMS Device Manager, right-click AMS Wireless Vibration Monitor and then select
2. Enter the network ID for the wireless network in the Join Device to Network screen
3. Enter the Join Key in the screens that follow, and click Next.
4. Select the Accept new join key option, and click Next.
5. Click Finish when done.
24
Methods → Join Network.
and click Next.
You can obtain the network ID from the Emerson Wireless Gateway web server.
Click Setup → Network → Settings.
User Guide
MHM-97927-PBF
in
MHM-97927-PBF, DRAFT