Manual Override - Lippert Components Ground Control 3.0 Owner's Manual

Manual Override

Top of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension (no socket)
1.
Find the port on the top of the jack motor (Fig. 12A).
2. Remove the rubber plug (Fig. 13A).
3/8
3.
Insert the " drive ratchet into the port (Fig. 14).
4.
Turn the override until the jack extends or retracts to desired position.
Bottom of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension,
1.
Find the port on the bottom of the jack motor (Fig. 12B).
2.
Remove the rubber plug (Fig. 15A).
5/16
3. Insert the " socket into the port (Fig. 16).
4.
Turn the override until the jack extends or retracts to desired position.
Fig. 12
A
B
Rev: 03.02.2017
5/16
" socket
Fig. 13
A
Fig. 15
A
Page 15
Fig. 14
Fig. 16
Ground Control 3.0 with OneControl