Fixture Installation - ADJ HYDRO WASH X7 User Instructions

FIXTURE INSTALLATION

Screw one clamp via a M12 screw and nut into the Omega Bracket. Insert the quick-lock fasteners of the
Omega Bracket into the respective holes of the fixture base plate. NOTE: The clamp must be attached
to the Omega Bracket before attaching the bracket to the fixture. Tighten the quick-lock fasteners
fully clockwise. Pull the safety-cable through the opening located on the bottom of the unit and over the
trussing system or a safe fixation spot. Insert the end in the carabiner, and tighten the safety screw.
14