ADJ HYDRO WASH X7 User Instructions page 25

SYSTEM MENU
MANUAL CONTROL - This menu is for manual testing and manual control. Under MANUAL CONTROL,
the fixture has two control modes; "MODE 1" and "MODE 2".
NOTE: NO DMX STATUS must be set to "Manual" when using Manual Control.
INTERNAL PROGRAMS - This menu allows you to select 1 of 4 (0-4 internal programs to run. Program
speed and fade speed are adjustable. The selected program will also run when "Int Program." is
selected under the "NO DMX STATUS" setting.
TARGET MODE - Target mode is a restrictive pan/tilt control limiting the movement to a certain degree.
See diagram of the Target Mode Movements.
INFORMATION - The submenus listed under INFORMATION are as follows: Fixture Life Time, Total
LED Time, Fixture Temps, Humidity, Fan Info. (RPM), DMX Values, Error Logs, Max Temp LED
ON, High Temp LED OFF, and Software Version.
• FIXTURE LIFE TIME
• Power On Time -The TOTAL power ON running time of the unit is displayed. This time CANNOT
be reset.
• P-On Time-R - The CURRENT power ON running time of the unit is displayed. This running time
may not be the same as the total power ON running time displayed under "Power On Time".
This time CAN be reset. NOTE: The displayed time represents the current power ON time
since the last reset.
• P-On Time Reset - Reset the CURRENT power ON running time that is displayed under "P-On Time-R".
• TOTAL LED TIME
• LED On Time - The TOTAL LED ON time is displayed. This total LED ON time CANNOT be
reset. NOTE: The displayed time represents the TOTAL LED ON time.
• LED On Time-R - The CURRENT LED ON running time is displayed. This running time may not
be the same as the total LED ON time displayed under "LED On Time". This total LED ON time
CAN be reset. NOTE: The displayed time represents the CURRENT LED ON time since the
last reset.
• LED On Time Reset - With this function you can reset the CURRENT LED ON time that is
displayed under "LED On Time-R".
25