Table of Contents
Advertisement
Theatrix PRO 48 LED
Auto Test
- This function can run a self test program.
1. Tap the MENU button until "Auto Test" is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Manual Test
- With this function you can manually test
the individual features.
1. Tap the MENU button until "Manual Test" is displayed, press
ENTER.
2. Press the UP or DOWN buttons to find the individual colors
and group you wish to test. You can also test the strobe func-
tion and dimmer.
3. Once you find a color you wish to test, press the ENTER
button and The display will start to flash. You can now adjust
the color by pressing the UP and DOWN buttons. Once you
have finished testing press the ENTER button and display will
stop flashing.
4. To exit the manual test mode, press the MENU button.
White Balance
- With this function you can adjust the
RGB colors to make your desired color.
1. Tap the MENU button until "White Balance" is displayed,
press ENTER.
2. "r255" will now be displayed and blinking. Press the UP and
DOWN buttons to adjust the red color to your desired level.
Press ENTER to save the setting and move on to the next color
adjustment.
3. Repeat step 2 until satisfied.
American DJ Supply
- www.americandj.com - Theatrix PRO 48 LED User Manual Page 11
©
®
System Menu
Theatrix PRO 48 LED
Fixture Temp
running temperature of the unit.
1. Tap the MENU button until "Fixture Tem" is displayed, press
ENTER.
2. The current running temperature of the fixture will now be dis-
played. Press MENU to exit.
Fixture Time
running time of the unit.
1. Tap the MENU button until "Fixture Time" is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
Firmware Version
sion
1. Tap the MENU button until "Firmware Version" is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
Theatrix PRO 48 LED
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. the quantity that can be
connected is 10 fixtures maximum. After 10 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
American DJ Supply
©
- With this function you can display the
- With this function you can display the
- This will display the software ver-
Power Cord Daisy Chaining
- www.americandj.com - Theatrix PRO 48 LED User Manual Page 12
®
System Menu
Advertisement
Table of Contents
