Table of Contents
Advertisement
SYSTEM MENU
MAIN MENU
SUB MENU
DMX Address
DMX
DMX Channel
SETTINGS
Mode
No DMX Status
Select Signal
Status Settings
WiFly Settings
Fan Settings
Dim Modes
PERSONALITY
LED Refresh Rate
Gamma
Reset Motors
Display
Service
(Pass Code = 50)
OPTIONS / VALUES (Default Settings in BOLD)
001-XXX
15Ch / 17Ch / 41Ch
Hold Last / Blackout / Int Programs / Manual
DMX: YES / NO
WiFly: YES / NO
WiFly and DMX Out: YES / NO
Pan Invert: ON / OFF
Tilt Invert: ON / OFF
P./T. Feedback: ON / OFF
P./T. Speed: Speed 1 / Speed 2
Hibernation: Off / 01M~99M / 15M
Set WiFly Channel: 00~14
Enable / Disable WiFly
Head: Auto / High / Silent (Low)
Base: Auto / High / Silent (Low)
Standard/Stage/TV/Architectural/Theatre/Stage2
Dim Speed: 0.1-0.9s ~ 1-10s
900Hz / 1000Hz / 1100Hz / 1200Hz / 1300Hz /
1400Hz / 1500Hz / 2500Hz / 4000Hz /5000Hz /
6000Hz / 10000Hz / 15000Hz
1.0 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8
Reset All Motor: YES / NO
Pan/Tilt Reset: YES / NO
Zoom Reset: YES / NO
Intensity: 1~10 (Dimmest-Brightest)
Display Invert: YES / NO
Screen Saver Delay: OFF~10M
Lock On/Off: ON / OFF
Calibration - Pass Code = 050
USB Port Power: ON / OFF
Update Software
Factory Restore: YES / NO - Pass Code = 011
21
DESCRIPTION
DMX Addressing
DMX Channel Mode Selection
DMX Lost Status
Control via DMX
Control via WiFly
Control via WiFly and send DMX Out
via DMX cable
Reverse Pan Motion
Reverse Tilt Motion
Pan/Tilt Movement Feedback
Pan/Tilt Movement Speed
Sleep Setting (No Activity)
Set WiFly Wireless Channel
Activate / Deactivate WiFly
Head Fan Speed Setting
Base Fan Speed Setting
Dimming Curve Modes Dimming
Speed
LED Refresh Setting
Gamma Brightness
Reset All Motors
Reset the Pan & Tilt Motors
Reset the Zoom Motor
Display Intensity Adjustment
Display Inversion Display
Blackout Time
Display Control Lock
Calibration/Adjustments
USB Port Activation
Software Update
Restore Factory Settings
Advertisement
Table of Contents
