Settings For Special Display Pattern P00 - Mitsubishi Electric ME96SSEB-MB User Manual

3. How to Set up

Settings for Special Display Pattern P00

If you want to set a display pattern other than P01 or P02, P00 is available to freely set display items. This
setting is conducted in the setting menu 1. The explanation here begins with the settings for P00 at ②Display
pattern in the setting menu 1. For other operations, which are not explained here, refer to 3.2.
(1) A maximum of 16 measuring items in four screens are available.
Screen
4-1
First line: Item 1
Second line: Item 2
Third line: Item 3
Fourth line: Item 4
From the first line to the third line, each selectable item is A, DA, V, W, var, VA, PF, or Hz.
At the fourth line, Wh, - Wh, varh, and VAh are selectable.
(2) As an example, the following display pattern is used for explanation.
Screen
2-1
First line: DA
Second line: V
---
Third line:
---
Fourth line:
Lower stage: Wh
How to set up
(3)
②Display pattern
Screen
4-2
First line: Item 5
Second line: Item 6
Third line: Item 7
DISPLAY DISPLAY
Fourth line: Item 8
Screen
2-2
First line: W
Second line: var
Third line: PF
DISPLAY DISPLAY
Fourth line: Wh
You will set up a display pattern.
(1) Select "P00."
Select "P00" with
(2) Set the first line to "DM A" in the screen 4-1.
Select "DM A" with
(3) Set the second line to "V" in the screen 4-1.
Select "V" with
＋
(4) Set the third line to no display in the screen 4-1.
Select "---" with
(5) Set the fourth line to no display in the screen 4-1.
Select "---" with
Screen
4-3
First line: Item 9
Second line: Item 10
Third line: Item 11
DISPLAY
Fourth line: Item 12
or and then press
＋ －
or and then press
－
＋
or and then press
－
or and then press
＋ －
or and then press
＋ －
34
Screen
4-4
First line: Item 13
Second line: Item 14
Third line: Item 15
DISPLAY
Fourth line: Item 16
.
SET
SET
.
SET
SET
.
SET
SET
.
SET
SET
.
SET