Cleaning And Maintenance; Enamelled Parts - Elba DOMINO HOBS Instructions For Use Manual

4
4

CLEANING AND MAINTENANCE

GENERAL
RECOMANDATION
Before you begin cleaning you
must ensure that the hob is
switched off.
It is advisable to clean when the appli-
ance is cold and especially when
cleaning the enamelled parts.
All enamelled surfaces have to be
washed with soapy water or some
other non-abrasive product with a
sponge and are to be dried preferably
with a soft cloth.
Avoid leaving alkaline or acid sub-
stances (lemon juice, vinegar etc.) on
the surfaces.

ENAMELLED PARTS

All the enamelled parts must be
cleaned with a sponge and soapy
water only or other non-abrasive
products.
Dry preferably with a chamois leather.
If acid substances such as lemon
juice, tomato conserve, vinegar etc.
are left on the enamel for a long time
they will etch it, making it opaque.
STAINLESS STEEL ELEMENTS
Stainless steel parts must be rinsed
with water and dried with a soft and
clean cloth or with a chamois leather.
For difficult dirt, usea specific non-
abrasive product available commer-
cially or a little hot vinegar.
18
CAUTION: Any abrasive substances
and non-neutral detergents are
absolutely not to be used as these
can cause permanent damage to
these elements.
Do not use steam jet cleaners
because the humidity could
infiltrate into the appliance making
it dangerous.