Cleaning And Maintenance; General Advice; Enamelled Parts - Elba E30-800 X Instructions For The Use

3

CLEANING AND MAINTENANCE

GENERAL ADVICE

✓ Before you begin cleaning you must
ensure that the hob is switched off.
It is advisable to clean when the
appliance is cold and especially when
cleaning the enamelled parts.
✓ All enamelled surfaces have to be
washed with soapy water or some
other non-abrasive product with a
sponge and are to be dried preferably
with a soft cloth.
✓ Avoid leaving alkaline or acid sub-
stances (lemon juice, vinegar etc.) on
the surfaces.
CAUTION: Any abrasive substances and non-neutral detergents are absolutely not
to be used as these can cause permanent damage to these elements.
Do not use steam jet cleaners because the humidity could infiltrate into the appli-
ance making it dangerous.
14

ENAMELLED PARTS

✓ All the enamelled parts must be
cleaned with a sponge and soapy
water only or other non-abrasive
products.
✓ Dry preferably with a chamois leather.
If acid substances such as lemon
juice, tomato conserve, vinegar etc.
are left on the enamel for a long time
they will etch it, making it opaque.
STAINLESS STEEL ELEMENTS
✓ Stainless steel parts must be rinsed
with water and dried with a soft and
clean cloth or with a chamois leather.
✓ For persistent dirt, use specific non-
abrasive products available commer-
cially or a little hot vinegar.