Cleaning And Maintenance; General Cleaning; Ignition Plug - Elba EGH-G6404G Owner's Manual

CLEANING AND MAINTENANCE

Before carrying out cleaning or maintenance, disconnect the appliance from
the electrical mains and gas supplies then allow it to cool down.

GENERAL CLEANING

Wash cast iron with lukewarm water and detergent. Do not use abrasive
cleaner which might damage them.
Wash the burner caps often with boiling water and detergent, taking care to
remove all deposits after cooking.
The trivet can also be washed in a dishwasher.
For stubborn dirt, clean using non-abrasive detergents with lukewarm water.
Do not use scouring pads, steel brush or acids for cleaning.
Clean the hob regularly with a soft cloth with lukewarm water and a little liquid
detergent. Do not use the following products:
- bleaches;
- soaped scouring pads;
- steel brush scouring pads;
- stain removers for baths or sinks.
If the hob gets very dirty, use specific commercial cleansing products.

IGNITION PLUG

Automatic burner ignition is provided (when
installed) by a ceramic plug and a metal electrode.
Periodically clean these parts of the hob
thoroughly. In addition, to avoid ignition difficulties,
check that the cavities in the burner are not
obstructed. To remove deposits from the burner
cavities, remove the cap and separate the two parts (see diagram on the right).
After cleaning, put the two parts back together and return them correctly to
their position. After washing, replace the trivet, checking that they are correctly
positioned.
5