Adjusting Fan Belt Tension - Kioti DK4210(C)HSE Manual

IMPORTANT
•
When disconnecting the fuel
pipe for replacement, plug
both ends with cloth or paper
to prevent dust or foreign ma-
terial from entering it. Other-
wise, the fuel injection pump
can be damaged. Pay extra
caution to the fuel pump to
prevent dust from entering it.
TD210-미국법인향-DK4210,4710,5310,60125 25
ADJUsTING FAN BElT TENsION (V)
(1) adjusting Bolt
(a) adjusting Belt tension (B) Pull
in order to extend the fan belt's life-
time, the tension of the belt should
be correctly adjusted if it slips. the
belt tension should be inspected
regularly according to the following
procedure:
1. stop the engine and apply the
parking brake.
2. open the hood.
3. in order to measure the belt ten-
sion, apply thumb pressure strong-
ly to the "a" location of belt.
Belt deflection for
proper fan belt tension (A)
A deflection of between
0.27 ~ 0.35 in. (7 ~ 9 mm)
4. if the tension is incorrect, loosen
the alternator mounting bolts and,
using a lever placed between the
alternator and engine block, pull
the alternator out until the deflec-
tion of the belt falls within accept-
tD2o725a
able limits.
5. Be sure to retighten the alternator
mounting bolt and hinge bolt se-
curely after adjusting belt tension.
6. replace the fan belt if it is dam-
aged, cracked or worn.
CAUTION
To avoid injury:
•
Be sure to stop the engine be-
fore checking belt tension.
7
25
-
maintenance
5 7
2019-09-18 오후 4:53:38