Rear Turn Signal Lamp And Position Lamp - Kioti DK4210(C)HSE Manual

(1) cap (2) connector
2. remove the cap.
3. Press and turn the socket coun-
terclockwise to remove the bulb. if
the bulb is blown, replace it with a
new bulb with the same capacity.
TD210-미국법인향-DK4210,4710,5310,60141 41
WARNING
•
If using a bulb other than the
specified one, the lamp can be
damaged and the tractor can
even catch fire.
•
Make sure to use bulbs with
the specified capacity.
CAUTION
D21o714a
•
Make sure to use a kIOTI genu-
ine bulb. Using a non-recom-
mended bulb can cause a fire.
•
The headlamps can temporar-
ily be fogged due to rain or
car wash. This is because of
the temperature difference be-
tween the inside and outside of
the lamp, which is normal.
maintenance
REAR TURN sIGNAl lAMP AND
POsITION lAMP
1 1 1
(1) turn signal lamp
1. the rear turn signal lamps are
mounted on the rear fender.
7
1
-
D21o715a
5 7
2019-09-18 오후 4:53:49