4
1
dK4210(c)hse / dK4710(c)hse / dK5310(c)hse / dK6010(c)hse
-
dpF regeneration underway lamp
this lamp comes on while the regen-
eration process is being performed in
the dpF.
important
•
if the dpF regeneration under-
way lamp is illuminated during
operation, please keep the en-
gine rpm at 1,500 or above.
TD210-미국법인향-DK4210,4710,5310,60118 18
warning
•
do not touch or go closer the
dpF part during the regenera-
tion process as its surround-
ing area is hot. otherwise,
there is a danger of personal
injury or burns.
td2o432c
dpF regeneration warning
lamp
1. stage 1 warning lamp for dpF
clogging
: dpF soot loading level 120% -
160%
Manual regeneration required.
engine rpM limit is activated
(below 2,200 rpm)
if the dpF is not regenerated in the
stage 1 warning state, the warning
lamp blinks. in this state, make sure
to perform dpF regeneration pro-
cess. (see page 4-11)
td2o434b
2020-11-18 오후 2:34:52