Changing Engine Oil And Replacing Filter - Kioti DK4210(C)HSE Manual

7
16 Dk4210(c)hse / Dk4710(c)hse / Dk5310(c)hse / Dk6010(c)hse
-
ChANGING ENGINE OIl AND REPlACING FIlTER (l)
(1) oil filler hole (2) oil Dipstick
(a) oil level is acceptable within this range
1. Park the tractor on a level ground
and start the engine to warm it up.
TD210-미국법인향-DK4210,4710,5310,60116 16
tD2o706a
(1) Drain Plug
2. stop the engine, apply the parking
brake and remove the drain plug.
3. wait until the oil is cooled down.
4. Place the oil pan under the en-
gine and unscrew the drain plug
counterclockwise to drain the oil
completely. all the used oil can be
drained out easily when the engine
is still warm.
tD2o710a
(1) engine oil filter
5. Remove the oil filter from the bot-
tom of the fuel filter on the right
side of the engine.
6. Apply a thin film of oil to the O-ring
of a new filter and tighten the new
filter firmly by hand.
7. Fill the engine oil to the specified
level and tighten the oil filter to the
specified torque.
Oil Capacity [U.s. gal(l)]
1.95 (7.4)
tD2o711a
2019-09-18 오후 4:53:32