Adjusting Fan Belt Tension (V); Adjusting Fan Belt Tension (V) - Kioti DK6010 Owner's Manual

3. if the fuel pipes and hose clamps
are found damaged or deterio-
rated earlier than two years, then
change them immediately.
4. a f t e r t h e f u e l p i p e a n d h o s e
clamps have been changed, bleed
the fuel system.
WARNING
stop the engine when check-
•
ing the items above.
Inspect the fuel pipe regularly.
•
The fuel pipes are subject to
wear and aging. Failure to
perform periodic inspections
may lead to a fuel leak. Fuel
leaking on a hot engine could
cause a fire.
TD210-EEC인증용-DK6010H,DK6010C,DK625 25
IMPORTANT
• When disconnecting the fuel
pipe for replacement, plug
both ends with cloth or paper
to prevent dust or foreign ma-
terial from entering it. Other-
wise, the fuel injection pump
can be damaged. Pay extra
caution to the fuel pump to
prevent dust from entering it.
maintenance

ADJUsTING FAN BElT TENsION (V)

(1) adjusting Bolt
(a) adjusting Belt tension (B) Pull
in order to extend the fan belt's life-
time, the tension of the belt should
be correctly adjusted if it slips. the
belt tension should be inspected
regularly according to the following
procedure:
1. stop the engine and apply the
parking brake.
2. open the hood.
3. in order to measure the belt ten-
sion, apply thumb pressure strong-
ly to the "a" location of belt.
7
- 25
td2O725A
5 7
2018-12-27 오전 10:30:43