Adjusting Engine Valve Clearance; Replacing Air Cleaner Filter - Kioti DK4210(C)HSE Manual

7
30 Dk4210(c)hse / Dk4710(c)hse / Dk5310(c)hse / Dk6010(c)hse
-
ADJUsTING ENGINE VAlVE
ClEARANCE (AE)
improper adjustment of the valve clear-
ance can reduce the performance
and / or damage the engine. this ad-
justment should only be preformed by
a certified kIOTI dealer.
TD210-미국법인향-DK4210,4710,5310,60130 30
REPlACING AIR ClEANER FIlTER (AF)
1 1 1
2 2
3 3
(1) filter (2) Dust cap
(3) evacuator valve
if the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the filter
should be inspected frequently. its
replacement interval can be changed
according to driving conditions. re-
place the filter according to the fol-
lowing procedure:
1. open the hood and check the suc-
tion hose and air cleaner housing for
damage.
2. unscrew the air cleaner clip and
remove the cover.
3. clean the inside of the air cleaner
housing thoroughly.
4. replace the filter and check the
housing for damage.
5. Install the cover and fix it with the clip.
NOTE
•
when installing the cover, make
D21o709a
sure that the dust collection
valve is heading down.
CAUTION
•
Use only a KIOTI genuine fil-
ter. If using a product other
than the genuine one, it can
damage the engine internal
section and sensor.
•
Make sure that no dust enters
the system by installing the
cover firmly.
•
When removing the filter, be
careful not to let foreign ma-
terial enter the air inlet.
2019-09-18 오후 4:53:41