Pt Coupler Socket; Connecting And Disconnecting Implement Connection - Kioti DK4210(C)HSE Manual

ImPORTANT
•
Put the detent valve operating
lever into the neutral position
when the hydraulic implement
is not in use. If the detent
valve is kept in the operating
position for an extended pe-
riod of time, the relief valve is
kept open and the temperature
of the hydraulic fluid rises,
leading to damage of various
hydraulic parts, such as the
oil seals and O-rings.
•
W h e n t h e d e t e n t v a l v e i s
in operation, unnecessary
load is applied to the engine.
Therefore, the engine power
decreases significantly, and
noise and vibration increases
by the opening of the relief
valve.
•
It is hard to start the engine while
the detent valve is in operation.
This is especially true in winter
and exhaust gas increases even
after the engine is started.
TD210-미국법인향-DK4210,4710,5310,60123 23
PT1/2 COUPlER SOCKET
(ImPlEmENT)
(A) diameter
The hose unions used must comply
with ISo standards.
dimension (A) must be between
20.48 and 20.56 mm (0.806 and
0.809 in.).
CONNECTING AND DISCONNECTING
ImPlEmENT
CONNECTION
1. Make sure to stop the engine be-
fore connecting it.
2. Move the double acting valve le-
ver forward and backward for 4
to 5 times to release the pressure
in the hydraulic line of the tractor.
otherwise, it is hard to connect the
couplers, and hydraulic fluid can be
sprayed from the line and get in to
Tc2O525a
your eyes while connecting them.
3. R e m o v e a n y f o r e i g n m a t e r i a l
around the male and female cou-
plers. If foreign material enters the
hydraulic components, it can lead
to malfunction of the system.
4. open the dust-proof cover of the
female coupler of the tractor and
insert the male coupler of the im-
plement. A clicking sound is heard
when the couplers are engaged.
5. pull the hydraulic hose of the im-
plement to check that the couplers
are properly connected.
6. Start the engine and check the op-
erating status and leakage.
5
opERATIoN 
-
5
2019-09-26 오전 9:43:53