Checking Gauges, Meter And Indicator Lights (I); Checking Gauges, Meter And Indicator Lights (I); Checking Head Light, Hazard Light Etc. (J); Checking Head Light, Hazard Light Etc. (J) - Kioti DS3510 Owner's Manual

ChECKING GAUGES, METER
ANd INdICATOR lIGhTS (I)
1. inspect the instrument panel for
broken gauge(s), meter(s) and in-
dicator lights.
2. replace if broken.
ChECKING hEAd lIGhT, hAz-
ARd lIGhT ETC. (J)
1. inspect the lights for broken bulbs
and lenses.
2. replace if broken.
checkinG seat Belt anD
ROPS (K)
1. always check condition of seat
belt and ROPS attaching hardware
before operating tractor.
2. replace if damaged.
DS3510(UM26)-AU-07.indd 13

ChANGING ENGINE OIl ANd REPlACING fIlTER (l)

(1) oil inlet Plug (2) Gauge
(a) oil level is acceptable within this range
1. Park the tractor on a level ground
and start the engine to warm it up.
U26O707A
(1) drain Plug
2. stop the engine, apply the parking
brake, and remove the drain plug.
3. to drain the used oil, remove the
drain plug at the bottom of the en-
gine and drain the oil completely
into the oil pan.
all the used oil can be drained
out easily when the engine is still
warm.
7
- 1
maintenance
U26O710A
7
2010-12-31 오후 3:42:30