Checking Gauges, Meter And Easy Checker (I); Checking Gauges, Meter And Easy Checker (I); Checking Head Light, Hazard Light Etc. (J); Checking Head Light, Hazard Light Etc. (J) - Kioti DS4110 Manual

7
-1 Ds4110(hs) / Ds4510(hs)
ChECkINg gAUgEs, METER
AND EAsy ChECkER (I)
1. inspect the instrument panel for
broken gauge(s), meter(s) and
easy checker lamps.
2. replace if broken.
ChECkINg hEAD lIghT, hAz-
ARD lIghT ETC. (J)
1. inspect the lights for broken bulbs
and lenses.
2. replace if broken.
ChECkINg sEAT BElT AND
ROPs (k)
1. always check condition of seat
belt and rops attaching hard-
ware before operating tractor.
2. replace if damaged.
M50-EU-07.indd 14
ChANgINg ENgINE OIl AND
REPlACINg FIlTER (l)
(1) oil Dipstick (2) engine oil Fiiler
(a) oil level is acceptable within this range
1. park the tractor on a level ground
and start the engine to warm it up.
H61O709A
(1) Drain plugs
2. stop the engine, apply the parking
brake and place the container un-
der the tractor.
3. wait until the oil is cooled down.
4. remove the drain plugs at the bot-
tom of the engine and drain the oil
completely. all the used oil can be
drained out easily when the en-
gine is still warm.
Be sure to put the drain plugs to
the oil sump securely.
H61O710A
2009-09-28 오후 6:11:30