Table of Contents
Advertisement
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the
sensor
board.
2. Install the
eDP/display
3. Install the
camera/microphone
4. Install the
display
hinges.
5. Install the
display
panel.
6. Install the
display
bezel.
7. Install the
display
assembly.
8. Install the
base
cover.
9. Install the
microSD
card.
10. Install the
SIM
card.
11. Follow the procedure in
Dummy SIM-card slot filler
Removing the dummy SIM-card slot filler
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
3-cell battery
8. Remove the
system
fan.
9. Remove the
assembly inner
10. Remove the
system
board.
cable.
module.
after working inside your
before working inside your
card.
or
4-cell
battery.
frame.
computer.
computer.
Removing and installing components
101
Advertisement
Table of Contents
