Part Identification Chart - Pro-Form PFBE01220.0 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot fi nd
a part in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use
power tools for assembly.
M6 Washer (22)–4 M10 Locknut
(19)–10
M10 Washer (20)–2
M10 Large Washer (27)–2
M4 x 19mm
M6 x 16mm M6 x 65mm
M10 x 20mm
Screw (28)–1
Screw (24)–4 Screw (17)–4
Screw/Bolt (25)–3
M10 x 63mm Bolt (16)–2
M10 x 65mm Carriage Bolt (18)–4
M10 x 70mm Bolt (26)–2
M10 x 85mm Bolt (23)–1
6