Operating Time; Eco Mode - Harvia Sentiotec home.com4 BLACK Instructions For Installation And Use Manual

Instructions for use for the user

10.9. Operating time

In the technician menu of the sauna control unit you can now specify
how long the sauna should be in continuous operation (such as 6 h for
private saunas).
1.
The "Runtime" submenu opens and the last runtime set appears
underlined on the display.
2. Press the rotary selector to change the value.
The value is now highlighted in green and can be changed.
The display is in hh:mm.
The set value is saved permanently.
3. To exit the submenu, move the cursor to the "Back" icon on the left

10.10. ECO mode

The ECO function allows you to save energy in breaks between sauna
sessions. When the ECO function is activated, the connected appliances
run with reduced power. You can choose between a 20, 40 or 60-minute
sauna break.
The sauna heater and the vaporizer are switched on again before the
end of the break. In this way the preset temperature and preset humidity
are reached again at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Use rotary selector 1
to open the submenu.
The "ECO mode" submenu opens and the last break time set
appears underlined on the display.
p. 42/64
1 to select the runtime