Preset Time - Harvia Sentiotec home.com4 BLACK Instructions For Installation And Use Manual

Instructions for use for the user

10.8. Preset time

Setting the preset time
You can set the preset time to the minute. The maximum preset time
totals 12 hours.
1. Start the functions to be started after the preset time.
2. Use rotary selector 1 to select the preset time icon. Then press
The "Preset time" submenu opens and the last preset time appears
underlined on the display.
3. Press the rotary selector to change the value.
The value is now highlighted in green and can be changed.
The display is in hh:mm.
4. Move the cursor (underscore
the rotary selector.
All previously activated functions are switched off.
The remaining pre-selection time appears on the display.
Rotary selector 1
Once the preset time has elapsed, the selected functions are
started.
Cancelling the preset time feature
To cancel the preset time feature, press rotary selector 1 while simul-
taneously turning it to the right.
The preset time function is cancelled.
For security reasons, the operation is blocked during an active preset
time. To make changes to the settings, cancel the preset time function
and then start it again.
p. 41/64
EN