Quick Guide; First Switch-On; Choosing The Panel Language; Setting The Time And Day - Harvia Fenix SACF10 Manual

Main Menu - Function Menus
(The displayed view varies according to the features acquired and enabled.)
EN
Main Menu, page 
Controls in Menus
Confirm
Exit/Cancel

FIRST SWITCH-ON

First time when you switch on the wireless control unit, it will automatically prompt you to calibrate the
touch screen. The unit will guide you through the calibration process. After this you need to choose the
desired panel language and set the day and time. Make the required settings and confirm. If the unit does
not follow the above steps automatically, they can be carried out manually:
CALIBRATING THE TOUCH SCREEN (see section 2.10).

CHOOSING THE PANEL LANGUAGE

. Start Menu (the first menu to appear after switching on).
2. Press the Main Menu icon. Use the page change to scroll through the Main Menu to
User Settings and select.
3. Use the page change to scroll to Panel Language and select.
4. Choose a language and Confirm.
5. Press the Exit icon to return to the Start Menu.

SETTING THE TIME AND DAY

. Press the Main Menu icon. Use the page change to scroll through the Main Menu to Miscellaneous and select.
2. Use the page change to scroll to Adjust current time and select.
3. Set day and confirm.
4. Set time and confirm.
CHOOSING THE DEVICES TO BE ENABLED (see Service menu 2.9.9. b).
CONNECTIONS BETWEEN DEVICES
An icon in the upper left corner of the screen indicates whether
the connections are active or whether there are lost connections
or new devices to be connected. When connections are lost it can
also be a case that the wireless control unit is outside the operating
range (ca. 0 m) of the radio link.
Missing connections are established through device pair-up. See
the following quick tips or chapter 2.9.4. 'Device Pair-Up' (further
below).
4
Page change Main Menu, page 2
Arrow
Track
icons bar

QUICK GUIDE

Back to the Start Menu
Connection active – this
icon is displayed while the
devices are communicating
with each other.
No connection – this icon
is constantly displayed
while the connections are
disconnected.