Table 8 General Configuration Parameters; Table 9 Scalar Measurement Configuration Parameters - GE RSDetection RS-S131-200-ER0000 User Manual

g
5.3.3.1 Common Configuration Parameters
Every configuration has a number of general properties that are read-only but appear
under the category of "General." Since they are common, they will only be described below
and not repeated for each type of configuration.
Parameter Variable
General Date
Modified
Name
Type
5.3.3.2 Scalar Measurement Configuration Parameters
Every measurement has a number of properties that govern its behavior. These are
described in Table 9.

Table 9 Scalar Measurement Configuration Parameters

Category
Measurement LogEnable
LoggingIntervalSpan
NotifyEnable
UpdateIntervalSpan
Units
DoseRateTimeConsta
nt*
RoentgenToSievert*
* Applies to the Dose Rate scalar measurement only
Copyright © 2016 General Electric Company. All Rights Reserved

Table 8 General Configuration Parameters

Property Description
Date the parameter was
modified.
Name of the parameter.
The type of the parameter:
Event
ScalarMeasurement
CompositeMeasurement
System
SerialPort
Parameter
If true, measurement will be
logged whenever it is updated.
The database logging interval.
If true, a notification will be sent
whenever an update occurs.
The interval between
measurement updates.
Measurement units for display.
The dose rate time constant.
Conversion factor to convert
Roentgen to Sievert.
RSDetection
Default Setting
Cannot be
changed manually
Cannot be
changed manually
Cannot be
changed manually
Property Description
User's Manual
Optional Settings
Cannot be
changed manually
Cannot be
changed manually
Cannot be
changed manually
Choices
True
False
Manually type
True
False
Manually type
Measurement
dependent
Manually type
Manually type
S131-200-UM Rev A
Page 41